How to extend the service life of the spiral scale, focusing on these aspects
Company News
2021-07-05
View: Times

  Spiral scale is a relatively common weighing equipment among weighing equipment. It can weigh bulk and powder materials. In the market, this kind of measurement cost is also called reamer scale or screw feeder in the north. It is called spiral scale. There are more feeders. Because of its simple structure and convenient operation, it can mix powdery materials evenly, so it is widely used in cement, chemical and grain industries, and the equipment is very powerful. Shandong Kehua Heavy Industry is a manufacturer specializing in the production of spiral scales, loss-in-weight scales, quantitative feeders, and electronic belt scales. The company has professional production equipment and has been in business for decades. It is a manufacturer with a very good reputation in the industry. Welcome new and old customers Come to the factory for inspection and negotiation.

  Spiral scales are used a lot in daily life, and its maintenance is also particularly important. Good maintenance can greatly improve its service life, so the following precautions about spiral scales are very important!

   Zero-load start-up scale: Ensure that the equipment is kept in an empty state when it is started. If there is residual material to be cleaned during shutdown, remember to clean it up in time, and wait until the spiral scale reamer rotates before feeding.

   To ensure the firmness of the parts: the operator should check the tightness of the equipment on a daily or regular basis. If it is found to be loose, it should be tightened in time, especially the conveyor part.

   Uniform feeding of the silo: When the equipment is in normal operation, ensure that the equipment is fed uniformly. It should be noted that in the early stage of operation, it should be gradually increased. Remember not to increase the transportation volume at one time to avoid the conveyor jamming.

   Since the entire spiral scale body is a weighing part, the weight change and ash accumulation of any part will have a significant impact on the measurement accuracy. Therefore, it must be carefully maintained to keep it clean and keep it pristine