USE

　　This product is a new product developed by our company. It uses the electro-hydraulic push rod as the power source, and the push rod drive rod extends to drive the plowshare to descend, and then through the link mechanism, the lifting roller group simultaneously lifts the lower edge of the plowshare and the tape surface. The tight fit makes the material on the tape unloaded into the stone, and the stone is required. After the unloading is completed, the drive rod retracts to make the lead lift up, and the lifting roller group descends through the link mechanism to allow the material to pass smoothly.

The product features are as follows:

　　a. Most of the structures are mechanically connected, especially the linkage mechanism, thereby reducing the number of cubits and prolonging the service life.

　　b. The electro-hydraulic push rod is used as the power source to overcome the poor overload capacity of the electric j-holding rod, the motor that is easy to burn, and the defects of wire bending:

　　c. The moldboard of the main leather head is made of high-chromium-manganese closed grinding material. The small plowshare is made of Kuai grinding rubber plate, which greatly reduces the maintenance workload and saves costs.