TDG-GL type high temperature clinker chain plate scale
TDG-GL high temperature clinker chain plate scale is an automatic quantitative feeding or metering device developed to solve the measurement and control problems of high temperature clinker in the cement industry. The metering and feeding device of the high-temperature clinker into the grinding mill provides accurate metering data for the scientific management of the kiln in order to increase the cement output, reduce the heat consumption and.
TDG-GL high temperature chain plate scale adopts hanging installation method, which highlights many advantages such as high measurement accuracy, reliable operation, simple maintenance, low maintenance and strong adaptability to environmental conditions.
TDG-GL type high temperature clinker chain plate scale-main features:
The unique L-shaped material conveying plate is formed by die stamping of wear-resistant steel plate, with compact structure, stable operation and minimal noise, and the conical baffles on both sides can effectively prevent material leakage;
The conveying mechanism adopts a large-pitch cast sprocket and a single-sided curved plate roller chain (p=100) after special heat treatment, which is resistant to high temperature and wear, and there is no deviation in the conveying process;
The driving mechanism is matched with BW series cycloid reducer, which has stable transmission, low noise, low vibration and dust resistance;
The unique weak magnetic gear speed measuring device and high temperature load sensor make the weighing and speed measuring signals accurate and stable.
TDG-GL type high temperature clinker chain plate scale-main technical parameters:
1. Static measurement error < 0.5%;
2. Dynamic cumulative error (equivalent) ≤2% (in use);
3. Control accuracy: better than 2%;
4. Measuring range: 1-160t/h;
5. Scale body specifications: 650, 800, 1000
6. Zero value stability: better than 0.007%Cmax;
7. Nonlinearity of weighing signal: ≤0.5%;
8. Speed measurement signal: 40 pulses/revolution;
9. Four-pole three-phase AC asynchronous motor: 1.5kw, 2.2kw;
10. High temperature resistance range: ≤350℃;
11. Measurement of clinker specifications: granular, block, diameter not greater than 50mm, to ensure uniform and continuous discharge;
12. Sensors: The accuracy of the load cell and speed sensor is better than 0.1%, the load cell has overload protection, and the overload coefficient is 150%.
