Hoist is the most widely used vertical lifting equipment, it is used to lift various materials, such as: coal, ore, cement, cement clinker, etc. TB-NE series plate chain bucket elevator (hereinafter referred to as NE series Plate chain bucket elevator) is a product developed by our company by introducing advanced technology of similar products from abroad. In various industrial countries, this type of elevator is widely used. There are 11 models of NE series plate chain bucket elevator: NE15, NE30, NE50, NE100, NE150, NE200, NE300, NE400, NE500, NE600, NE800

　　Features of the hoist

　　Wide range of improvement. This type of elevator has less requirements on the type, characteristics and block size of materials. It can lift not only powdery, granular, and lumpy materials, but also abrasive materials. Material temperature ≤ 250℃

　　Large delivery capacity. This series of hoists has various specifications from NE15 to NE800. The lift range is 15～800m3/h.

　　The driving power is small. This type of elevator adopts inflow feeding, gravity-induced discharging, and adopts densely arranged large-capacity hopper for conveying, with low chain speed and large lifting capacity. When the material is lifted, there is almost no material return phenomenon, so the driving power is small, and the theoretical calculation power is 25% to 45% of the chain hoist.

　　long lasting. The feeding of the elevator adopts the inflow type, and there is little extrusion and collision between the materials. The design of this machine ensures that the material will not be scattered during feeding, lifting and unloading, which prevents abrasive wear and transport. The chain adopts plate chain type high-strength wear-resistant chain, which prolongs the service life of the chain and the chain bucket. According to the long-term practice of similar foreign products in production, the service life of the conveyor chain is more than 5 years.

　　Lift height is high. This series of hoists has low chain speed, balanced operation, and adopts plate-type high-strength wear-resistant chains, so it can reach a high lifting height (up to 40m)

　　Good sealing, less environmental pollution. The casing of the equipment produced by our company adopts the fully enclosed type, the flange connection adopts the groove sealing type, and the tail seal adopts the spring pressing type, which completely solves the problems of running, running, and leakage, and makes the equipment fully meet the environmental protection requirements.

　　Good operational reliability. The advanced design principle ensures the reliability of the whole machine operation, and the trouble-free time exceeds 30,000 hours.

　　Easy to operate and maintain, less wearing parts.

　　Mechanical size is small. Compared with other hoists with the same lifting capacity, the mechanical size of this hoist is smaller.

　　The structure has high precision. The casing is folded and welded, with good rigidity and beautiful appearance.

　　Low cost of use.

　　High security. The automatic protection of the equipment is advanced. A material level switch and a speed sensor are installed at the rear of the hoist. When the material is stored in the rear casing, the material level switch will immediately alarm and lock to stop. When the operating speed of the equipment drops beyond the set value, the speed The sensor will also immediately alarm and instruct to stop, which realizes automatic protection and avoids accidents.

　　Hoist technical parameter table